February 19, 20233 yr My U5 box programs will not stop blinking, unplugged hdmi wire reboot still continues to blink.
February 19, 20233 yr Have you tried another HDMI cable ? Are you using the oiginal power adapter that came with the U5 ? Reason I ask, is because many people are in a rush to test out their new toy, and assume it uses the same power supply as previous boxes. But the U5 and the xrs4900 use a 12V power supply. All other boxes, it is 5V. So if you use the power supply from another buzz box, the box will not have enough power 🙂 Just checking. Seen it happen many times.
February 22, 20233 yr Hi, I have a xrs4500 that is doinoku T g this "blinking" thing. Meaning the picture would go blank then come back on. Now, the tv will not recognize the buzz box. It"s asking if it's turned on. The TV is TCL Roku TV. I'm using the original power cord and bought a new certified HDMI cable.
February 22, 20233 yr 8 minutes ago, Ray said: I have read about hard reset but I don't have a reset button on this 4500 box. the reset button is in the av port
February 22, 20233 yr 10 minutes ago, Ray said: how do I use press the reset button in the av port? I use a toothpick
February 22, 20233 yr I pressed it and held for 10 secs or so. Nothing seems to be happening. What is the proper procedure? Should I see the blue light turn off and on?
February 22, 20233 yr I have used a Qtip, and cut off one the cotton tip on one end. No sharp point 🙂 Just be gentle with it. As you put it into the A/V, you will feel the resistance at about 1.5cm deep. You will then feel a soft click which is the reset button.
February 22, 20233 yr 5 minutes ago, Ray said: I pressed it and held for 10 secs or so. Nothing seems to be happening. What is the proper procedure? Should I see the blue light turn off and on? If you click the link provided by dishuser, it has a video with step by step details. https://stbtalk.com/index.php?/topic/300-factory-reset-hard-reset-xr4500-xrs4500/
February 22, 20233 yr 11 minutes ago, Ray said: I pressed it and held for 10 secs or so. Nothing seems to be happening. What is the proper procedure? Should I see the blue light turn off and on? unplug the box press and hold the button and then plug it in after about 10-15 seconds you'll get the recovery screen
February 23, 20233 yr I can't see anything from buzztv box on the screen. My screen just says "No Signal" Nothing happens when I do a hard reset. Although, I'm not able to put the box in recovery mode before the hard reset.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.