July 19, 20197 yr 1. Download the file onto a computer Then transfer it onto a USB drive or SD card Then insert into box 2. Use reset button inside AV hole on the back of your 3900 to get into recovery mode on first time boot. You will need to use a Tooth Pick or Paper Clip or something similar to do this. 3. Once in recovery Go to Apply update from ext Select Udisk which is USBDrive or SD Card depending on which one you have the Firmware on 4.Highlight the Firmware Press Ok to install it It will take up to 8 mins to install 5. Once finished Select reboot 6. It will boot back into Android and everything is normal and nothing is erased update_GTA_BUZZ_TV_ATV3900_7.1_STUCK-BOOT-FIX.img Disclaimer: This file is sole made for XPL3900 bootup issue. Using this file for any other model will void your warranty.
July 19, 20197 yr I tried this. After the install and reboot it it is still going back to the boot menu. Is it something to do with what I tried yesterday after the issue? Tried clearing partition and cache options; is that something to do with it?
July 19, 20197 yr Author 2 hours ago, Jean-Luc said: I don't see any reset hole in the back of the unit reset hole is in the AV port.
July 19, 20197 yr Author 13 minutes ago, Guest Ver said: I tried this. After the install and reboot it it is still going back to the boot menu. Is it something to do with what I tried yesterday after the issue? Tried clearing partition and cache options; is that something to do with it? try formatting your micro sd card , put the firmware back on the card. re-try the steps again. if you clear partitions you will erase everything off your box .if its continue to go back to boot menu it means you missing a step. If you continue to have problems please send back or drop off at our warehouse www.buzztv.com/rma Thank You!
July 20, 20197 yr The fix is not working for buzz 3000 xpl, resetting is not taking into recovery mode, keep showing the buzz tv logo
July 20, 20197 yr 9 hours ago, Guest Vince said: The fix is not working for buzz 3000 xpl, resetting is not taking into recovery mode, keep showing the buzz tv logo Spoke too soon, worked fine. Thanks guys.
July 20, 20197 yr Author 15 hours ago, Guest Babajeee said: Anyone have a fix for buzz3000 1gb ? thank you XPL3000 Basic (1GB) uses the same firmware as XPL3000. So the method on this thread will work on your box. However we recommend for XPL3000 Basic (1GB) to use Android 6 downgrade for better performance. This can be done by mailing the box or dropping it off at our location www.buzztv.com/rma
July 21, 20197 yr 2 hours ago, Guest Farran said: When I try and open this file it says the disk image file is corrupt. that means you didn't download the file fully, you need to delete your file and redownload the file again.
July 21, 20197 yr This fix worked with me. The reset is a bit tricky. You have to look (with a toothpick) on the reset micro-switch in the AV hole. It it a bit towards the top. I had no issue after that.
July 24, 20197 yr Unable to locate reset button inside of av hole. I tried with paper clip, without any success. Please help, I have xpl 3900. Freezes during start up when buzztv logo first comes up during boot up.
July 24, 20197 yr Does this FIX work on the BUZZTV 3000XPL Gold? Can I use this firmware? update_GTA_BUZZ_TV_ATV3900_7.1_STUCK-BOOT-FIX.img Thank you!
July 24, 20197 yr 12 hours ago, Jigstar said: Unable to locate reset button inside of av hole. I tried with paper clip, without any success. Please help, I have xpl 3900. Freezes during start up when buzztv logo first comes up during boot up. its there ,its located near the top of av hole
July 24, 20197 yr 1 hour ago, ACMA said: Does this FIX work on the BUZZTV 3000XPL Gold? Can I use this firmware? update_GTA_BUZZ_TV_ATV3900_7.1_STUCK-BOOT-FIX.img Thank you! stugots ansered your question already
August 31, 20197 yr Author 22 hours ago, bstop said: Finally got into recovery mode, everything seem ok now after this fix 😀
May 12, 20206 yr On 7/19/2019 at 1:04 PM, Stugots said: 1. Download the file onto a computer Then transfer it onto a USB drive or SD card Then insert into box 2. Use reset button inside AV hole on the back of your 3900 to get into recovery mode on first time boot. You will need to use a Tooth Pick or Paper Clip or something similar to do this. 3. Once in recovery Go to Apply update from ext Select Udisk which is USBDrive or SD Card depending on which one you have the Firmware on 4.Highlight the Firmware Press Ok to install it It will take up to 8 mins to install 5. Once finished Select reboot 6. It will boot back into Android and everything is normal and nothing is erased update_GTA_BUZZ_TV_ATV3900_7.1_STUCK-BOOT-FIX.img 741.89 MB · 1,289 downloads Disclaimer: This file is sole made for XPL3900 bootup issue. Using this file for any other model will void your warranty. hello i'm able to get into recovery mode but for some reason i cannot toggle up or down on my usb remote. how did you guys navigate through this part to select "apply update from EXT"?
May 12, 20206 yr Dont think the usb remote would work in recovery mode You have another remote? Edited May 12, 20206 yr by nbs.
May 12, 20206 yr unfortunately form me the box only came with a usb remote. just wondering what other remote could be used to get this done?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.