Firmware V20260225

UPDATE TAKES UP TO 20 MINUTES TO DOWNLOAD + INSTALL 
YOU CANNOT REVERT BACK

Firmware Changes:

- Updated Youtube

Please Leave Feedback Below
 

have guide info while on the other it will not have any info for the same channel.  Is there a generic epg that

can be added that maybe fill in the blank spots?  If so what program and how would you add it.

Thanks Lee

I dont record much, but later today I want to. I select the channel, and put the show on, hit the red button and a grey message appears Task 'CHANNEL' [SHOW] has been added

it shows up in my scheduled menu under PVR, but not recordings.  I have tried setting a manual recording as well, nothing happens.

A red symbol shows up in the guide that I am recording- I think?

I have searched high and low for a similar thread, but nothing.

Theres a setting somewhere I need to change....

Please help!

We were going to return it and support convinced us that this would be a non-issue.

BTY I also have a classic and it works just fine.

Any suggestions where to look?

I use BT 500 on other X5 without no trouble 

Cloned the mac to my 3900 It plays with no problem.  Both hooked up to the same tv same channel at the same time.   Swap hdmi ports makes any difference.

I would do a reset but I do not know how to save my kodi favorites.  (would be a royal pita to enter every thing again)

My u5 died just after the warranty ran out, this one is getting close to the end of warranty. 

Version 5.0947

Suggestions?

So Netflix just starts and does nothing. Stuck on "get started" and the remote can't change anything. I got this because I thought it might rival the Nvidea Shield which I do have one of these also. But not a good start on this guy.

Has been working for 3 months. I can get it to go if I use m3u setup but have no EPG 

when you go to guide it says loading.  Any clues?

Can I connect the X5 SS through my Denon Receiver without any issues?

I know it says you can't with the PS6.

Thank you,

Adam

WILL BE DOWNLOADED IN MULTIPLE PARTS

FW Version 20250409

Changes:

- Fixed Duplicate Aptoide
- Fixed BT-250 Pairing issues.
- Added TeamViewer Quick Support 
- Fixed a bug with VLC not being recognized as a player in apps like Flixvision
- Added OTA Update for BT-350 Remote to fix the Search Button

Please leave feedback below

FW Version 20250220

Changes:

- Fixed Wake to Record from Shutdown. 
- Updated Buzz 5 App to V5.0.947
- All Pre Installed app now update via the Cloud
- Added Chrome App
- Added Support for All Buzz BT + IR + USB Remotes (Except the MIC button on BT350)
- Added AFR Feature to Buzz Utilities
- Added Network Shares Feature to Buzz Utilities
- Fixed a bug with Play Protect turning back on after turning it off
- Fixed a bug with VLC Player not being visible as a player on some apps
- Fixed a bug with programming color buttons in Buzz Utilities
- Fixed a bug with NTFS USB Drives not being detected

Please leave feedback below

Just got the latest X5-SS box and connected it to my new TCL 98Q672 TV. This is plugged in directly into the TV with the supplied HDMI cable. My Onkyo receiver is eARC connected.  I have AppleTV also hardwired into the other HDMI port on the back of the TV.  Everything is connected via Ethernet (no WiFi). 

At boot up, I paired the BT-400 remote and continued with the necessary updates. All went ok as expected. But at boot up, I only get 720P resolution. Tried rebooting, unplugging and re-plugging, tried the 3 different HDMI ports on the TV and also tried another HDMI 2.1 cable for kicks but nothing seems to work. I took the same X5-SS box and connected it to my older Samsung HDTV 1080P and at boot up the resolution on the X5-SS box comes up as 1080P as expected. No issues. 

I connected the X5-SS back to the TCL and rebooted - no go...same 720P issue. I called BuzzTV tech support, and after multiple attempts was finally able to talk to an agent. Tried all these same steps again - no go. He finally walked me thru Erasing and Resetting the X5-SS. Did that as well - still no go. The tech support agent was stumped as well and said he'll escalate to advance tech support and someone will be call me within 24 hours. It's now been 5 days and no call. Left multiple msgs, vm, and also via Chat - no response.

Before I finally request an RMA to return the unit, wanted to see if anyone here can help troubleshoot this issue.

Any help would be much appreciated. 

-Mark

I have two other android boxes, an Nvidia Shield and a Humax freeview android box. On both these boxes I have TiVimate installed and it works perfectly, I can even record on the shield but the lack of space means I can't record much.

I bought the X5 SS primarily for the abilty to record with more disk space, however I find I am unable to record anything at all. I did wonder if it is because I only have 1 connection on my sub and maybe BuzzTV doesn't like that, so I installed TiVimate on the X5 SS and set it up as I have on my shield but that will not record either.

I can't find anything in the Buzz TV app that asks for permission to write to disk or USB, so I'm guessing it is granted automatically.

Finally, a seperate issue, I thought I would install Kodi, and connect my 4tb external hard drive that works perfectly on my other boxes. But the X5 SS will not connect. If I go to storage it just says elements is disconnected.

Does this box not recognize a 4tb disk or is it because it is formatted NTFS.

Can anyone help please.

No sound on my TV when I'm using the X5 Super Sport model that I recently bought on black Friday!

If I plug my U5 (same cable, same TV and port)= working.  

Need help before contacting BuzzTV support.  Any idea?

Thanks

Sylvain